英諾冠單作用氣缸，PVA/8040/M/400/UR1

中位 16l/min（P1=10bar和P2=0bar）；
2位使用可選擇低泄漏型????＜1Nl/min
安裝方式: 任意????好電磁線圈向上
流動方向: 1→4+2→3；1→2+4→5
環(huán)境溫度: 0°C ~ +60°C
流體溫度: 0°C ~ +60°C（無冷凝物）
使用壽命：超過??250m??????（????????????????????????????行程）????????????????????????
重量: 1.165kg
防護等: IP65
動作時間狀況：
P1=6bar，??????????????????行程，排入大氣??????????????????????????????????????????
關閉時間: 3ms
提升時間（10%~90）%:5msRemove the plastic sealing caps from the exhaust ports.
When connecting up the piping, ensure that no foreign matter such as chips, sealing compound, scale, etc. enters the
piping system, since this may cause malfunctions. The pipes should be as short as possible and pipe bends should be
used instead of pipe angles. The port size of the pressure reducing valve, filter and lubricator must be the same as the
supply port ‘P’ of the press safety valve.
The operating pressure in the valve must never fall below 2 bar, since a lower pressure will inevitably lead to
malfunctions （install pressure switch!）.
Silencers should not affect the proper function of the press safety valve. They should be fitted in accordance with the
local accident prevention regulations.
Control system: A safe control system meeting regulations EN 692 （Mechanical Press Safety） and EN 954-1 （Safety of
Machines...） is a basic requirement.
Maintenance and testing: Maintenance and testing must be carried out according to the relevant national regulations
and the specifications of the relevant local safety associations. Maintenance and testing must be carried out only by qualified
and trained personnel.

英諾冠單作用氣缸，PVA/8040/M/400/UR1